Waterways SA2 Mixed Bed Filter

Mixed bed filters are used for sediment removal over a wide range of flow rates. Due to a much larger surface area and the ability to be backwashed the dirt holding/handling capability of a mixed bed filter is far superior to cartridges. The beds can be made up of different filtering sands and filtration media.

Description

TypeAutomatic Mixed Bed Filter
DescriptionSelf standing pressure vessel (blue) with top mounted valve
Media Tank13” (33cm) x 54” (137cm)
wound fibreglass pressure vessel
Media53kg of mixed media. Sand, anthracite and gravels
Control ValveFleck 5000 electronic valve, fast and rapid rinse, full adjustable function,
1-99 day backwash
Flow Rate - Continuous35 litres per minute
Flow Rate - Peak40 litres per minute
Maximum Pressure600 kpa (85psi)
Minimum Pressure175 kpa (25psi)
Inlet / Outlet Pipe3/4” (20mm)
Drain Pipe1/2” (12mm)
Voltage240 volts with 24 volts step down transformer
Note: Product specifications are a guide only and can change without notice.

Specification Sheet

Waterways Mixed Bed Filter – SA2