Waterways CM3 Carbon Filter

Carbon filters are use for water clarification (colour removal), bacterial capture/retention, chlorine removal and odour/taste removal. Carbon must be backwashed regularly to reduce the risk of bio-fouling occurring. Carbon filters don’t cope well with sediment loads, it’s therefore common to have a mixed bed filter installed prior to handle this.

Description

TypeManual Carbon Filter
DescriptionSelf standing pressure vessel (blue) with top mounted valve
Media Tank16” (41cm) x 65” (165cm)
wound fibreglass pressure vessel
Media50kg of calcite
Control ValveFleck 2510 manual valve
Fast backwash and rapid rinse Lever operation
Flow Rate - Continuous50 litres per minute
Flow Rate - Peak60 litres per minute
Maximum Pressure600 kpa (85psi)
Minimum Pressure175 kpa (25psi)
Inlet / Outlet Pipe3/4” (20mm)
Drain Pipe1/2” (12mm)
Flow Control SizeFleck # 700
Note: Product specifications are a guide only and can change without notice.

Specification Sheet

Waterways Carbon Filter – CM3